Source: http://forum.worldoftanks.eu/index.php?/topic/257640-the-fv4202-visit-and-inspection/

Hello everyone,

this post is probably not news to many people, but still an interesting piece of info. Not so long ago, a player called clanmcwood from EU forums did have a trip to Bovington and measured the thickness of the FV4202 turret. The results were interesting:

Original (8.6) FV4202 armor

What was measured

clanmcwood認為車長塔應該縮小(圖內標示的是高度而不是裝甲厚度)

砲塔正面砲塔環部分應該是240mm而不是195,砲塔正面其餘部分也應該有195而不是120

根據計算FV4202極速應該有43kmhhttp://forum.worldoftanks.eu/index.php?/topic/257640-the-fv4202-visit-and-inspection/page__st__600__pid__5321894#entry5321894

除此之外:

1.Richard did have with him a sounder device for measuring armor thickness, but alas I could not get a reading because the tank was so dirty with so much paint on it wouldn’t give us a reading.
因為外表塗料太厚導致超聲波厚度測量失敗

2.at this point and I notice the barrel looks a little strange, (for a start its not the 105 and second it’s not bloody fitted)
車上不是105炮而是20磅B型

3.Inspection wise this is mostly all we could confirm as we could not get into the turret
無法進入砲塔

As you can see, it’s a serious buff to the turret armor. The_Challenger on EU forums did state he’s going to be pushing for changes, so I think that’s something to look forward to…