Source:http://ritastatusreport.blogspot.nl/2015/10/pzkpfw-38-t-na-changes.html
来源↗

Hello Warriors,
大家嚎，

screenshots and Gif. of the Pz.Kpfw. 38 (t) n.A. changes for you.
以下是Pz.Kpfw. 38 (t) n.A.的改动的截图和Gif图

Note: I will be making separate posts for each tank that received the biggest changes as they are picture heavy and then stack the minor ones together in one post.
另：我只会把那些改动特别大的车单独发帖列出来，剩下改动很小的会整合到一个帖子里面

There is a tiny bit of information that was missing:
除了装甲改动之外还有一些没有写出的信息：

– Speed Limit got buffed to 64/20 (62/20 Previous)
极速从62/20Buff到了64/20

And lest remember what was posted previously:
还有之前发过的消息（请结合最下面的装甲图观看）

– View ports are now as thick as the surronding armor, not thinner.
观察孔和它周围的厚度一致了，而不是像以前一样更薄

– Small 70mm thick parts on UFP removed.
首上炮塔下面的一个垂直平面的一小块厚度为70mm的区域移除了

– Autobounce plate is now 15-10mm instead of 35-25mm.  The 15mm are where the spare tracks are.
原来那块跳弹很厉害的装甲正面首上从35~25mm砍到了15~10mm。15mm是有备用履带的那个位置。

– Hull roof is 10mm thick now for the most part instead of 8mm.  The opposite happened for the stock turret.
车顶装甲现在大部分地方的厚度是10mm了，而不是8mm。白板炮塔恰恰相反。

– Stock turret cupola is now 30mm instead of 30-22mm.
白板炮塔的观察塔的厚度是30mm了，而不是像以前一样的30~22mm。

– Front part of the “turret ring” is now 25mm instead of 30mm.
炮塔座圈的正面部分的厚度从30mm变成了25mm

– Mantlet is now 50mm thick instead of 25mm and the armor above and below it is 50mm instead of 30mm.
炮盾现在是50mm厚了，而不是以前的25mm。而炮盾上下的两块装甲的厚度是50mm，而不是30mm了。

– Spaced armor to the sides of the mantlet are now 10mm instead of 22mm.
炮盾侧边的间隙装甲现在的厚度是10mm，而不是22mm

– Top turret is no longer a clusterf**k of different armor thicknesses.
顶级炮塔的装甲厚度终于他[自主规制]的统一了

– The armor from the viewports on the side no longer stick out on the hitbox.
侧面的观察口处的装甲在hitbox上不会像以前探出来了

– The side armor was nerfed from 25mm to 20mm though the rear was increased from 10mm to 20mm.
侧面装甲从25mm砍到了20mm，而后面的装甲从10mmBuff到了20mm

– The turret face is now 30mm instead of 50mm.
炮塔正面从50mm砍到了30mm

– Mantlet is 30mm instead of 25mm.
炮盾厚度从25mmBuff到了30mm

3D Model
3D模型

GIF版

GIF版

GIF版

GIF版

Armor Model
装甲模型