10.0的88虎改动

Source:http://ritastatusreport.blogspot.nl/2015/10/88-cm-pak-43-jagdtiger-100-changes.html
来源↗

Hello Warriors,
大家嚎,

There is a tiny bit of information that was missing:
除了装甲改动之外还有一些没有写出的信息:

– Speed Limit was buffed to 38 / 12 ( 28 / 12  previous).
极速从之前的28/12Buff到了38/12

And lets remember what was posted a couple days ago:
还有前些日子说过的这些:

– Hull MG weakspot disappeared.
车身上的机枪孔弱点消失了

– LFP is now 50° instead of 45°, plus the very top part of the LFP is 150mm thick.
首下现在是50°厚了,而不是45°,而且首下最上边的那一块现在是150mm厚

– Extra sloped parts on the UFP for the driver and radioman periscopes are less wide, though the driver one now gives you a tiny sport sloped at 75°.
首上的驾驶员和通讯兵的潜望镜的更加倾斜的部分现在比以前窄了,尽管驾驶员的那个潜望镜现在有了一小块倾斜75°的区域

– Hull floor near the front is 40mm now instead of a solid 25mm.
靠近前方的车身底盘现在是40mm厚了,而不是以前的25mm

– Superstructure rear is 10° instead of 5°.
战斗室后方的倾斜角度是10°,而不是以前的5°

– Spare tracks cover a few areas on both sides of the superstructure, though dunno how thick they’re supposed to be since they’re 270mm thick now.
备用履带会覆盖战斗室侧面的一些区域,但是现在不清楚这些区域应该是多厚,因为现在模型上的厚度是270mm

– Bump on the superstructure front is now pretty much all 150mm thick instead of half being 80mm.
战斗室正面凸出来的那一块基本都是150mm了,而不是像以前一样有一半是80mm

– Superstructure front is now at 15° instead of 11°.
战斗室正面的角度是15°了,而不是11°

– Mantlet is 250mm-210mm thick instead of 240-150mm, meaning you still won’t be penned there.
炮盾的厚度现在是250~210mm,而不是以前的240~150mm厚。反正还是打不穿就是了

– Superstructure roof is 45mm instead of 40mm now.
战斗室的顶上现在是45mm厚了,而不是40mm

3D Model
视觉模型

88frontdone
GIF版

88side
GIF版

side2
GIF版

back88
GIF版

88top
GIF版

Armor Model
装甲模型

(the back and top are not shown as there are no armor changes)
(由于没有改动所以就不放背后和正上方的图片了)

armorfront

armorside

armorside2

10.0的88虎改动》上有12个想法

  1. 毛子的模型高清之后或多或少都消除了类似机枪口驾驶员观察窗之类的东西。。是越来越注重游戏性还是为了未来的车体活动部件做准备?

  2. 问下A大,9级以上车的战力计算方式是不是和9级以下的不一样,我有一辆车最高战力打到170’后来掉到140+’最后系统刷新出我的战力是150+,想咨询下什么情况

发表回复

您的电子邮箱地址不会被公开。 必填项已用*标注